Turn signal lever
Right turn
Left turn
Move and hold the lever partway to signal a lane change.
The right hand signal will flash until you release the lever.
Move and hold the lever partway to signal a lane change.
The left hand signal will flash until you release the lever.
■Turn signals can be operated when
The engine switch is in the ON position.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
Parking brake
Lever type
● Sets the parking brake
Fully set the parking brake while depressing the brake pedal.
At this time, the indicator will come on.
● Release the parking brake
Press the button
Turn the lever clockwise
Press it in completely
Pedal type
Sets the parking brake*.
(Depressing the pedal again releases the parking brake.) At this time, the indicator will come on.
*:Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot.
■Parking brake engaged warning buzzer
The buzzer sounds to indicate that parking brake is still engaged (with the vehicle having reach a speed of 3 mph [5 km/h]).
■Usage in winter time
See “Winter driving tips” for parking brake usage in winter time.
NOTICE
■Before driving
Fully release the parking brake.
Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.
Horn
To sound the horn, press on or close to the 
mark.
■After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
The horn may not sound if the steering wheel is not securely locked.
Download Manual