Gauges and meters
Gauges and meters

The following gauges, meters and displays illuminate when the engine switch is in the ON position.
Tachometer
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
ODO/TRIP button
Switches between odometer and trip meter displays. Pushing and holding the button will reset the trip meter when the trip meter is being displayed.
Odometer/trip meter
Odometer: Displays the total distance the vehicle has been driven.
Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
Odometer and trip meter display button
Pressing this button switches between odometer and trip meter displays.

Odometer
Trip meter A*
Trip meter B*
*: Pushing and holding the button will reset the trip meter.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted.

Brighter
Darker
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
●The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
Indicators and warning lights
The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems.
Instrument cluster

Center panel

■ Indicators
The indicators inform the driver of the operating state of the vehicle’s various systems.
Turn signal indicator
Headlight high beam indicator
Headlight indicator
Tail light indicator
Security indicator
Shift position and shift range indicators
Shift position and shift range indicators
Cruise control indicator
Slip indicator
VSC OFF indicator
TRAC OFF indicator
Downhill assist control system indicator
RSCA OFF indicator
Active traction control system indicator
AUTO LSD indicator
Four-wheel drive indicator
4LO indicator
Rear differential lock indicator
AIR BAG ON indicator
AIR BAG OFF indicator
■ Warning lights
Warning lights inform the driver of malfunctions in any of the vehicle’s systems.

*1: These lights turn on when the engine switch is turned to the ON position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: The indicator flashes to indicate that the system is operating.
*3: The indicator light comes on to indicate a malfunction.
*4: The indicator flashes to indicate a malfunction.
*5: For 2WD models, even though there is no function of deactivating the curtain shield airbags in a vehicle rollover, the RSCA OFF indicator turns on briefly when the engine switch is turned to the ON position. But this is not a malfunction.
CAUTION
■If a safety system warning light does not come on
Should a safety system light such as ABS and the SRS airbag warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Download Manual